east:~#
 TESTNAME=algo-pluto-05
east:~#
 source /testing/pluto/bin/eastlocal.sh
east:~#
 ipsec setup start
ipsec_setup: Starting Libreswan IPsec VERSION
east:~#
 ipsec auto --add westnet-eastnet-both
east:~#
 /testing/pluto/bin/wait-until-pluto-started
east:~#
 echo done
done
east:~#
 ipsec auto --delete  westnet-eastnet-both
east:~#
 ipsec auto --replace westnet-eastnet-3des
east:~#
 echo done
done
east:~#
 ipsec auto --delete  westnet-eastnet-3des
east:~#
 ipsec auto --replace westnet-eastnet-aes256
east:~#
 echo done3
done3
east:~#
 ipsec auto --delete  westnet-eastnet-aes256
east:~#
 ipsec auto --replace westnet-eastnet-two
east:~#
 echo done
done
east:~#
 

east:~#
 ipsec look
east NOW
0.0.0.0/0          -> 0.0.0.0/0          => %trap
192.0.2.0/24       -> 192.0.1.0/24       => %trap
ipsec0->eth1 mtu=16260(9999)->1500
tun0xTUN#@192.1.2.23 IPIP: dir=in  src=192.1.2.45 policy=192.0.1.0/24->192.0.2.0/24 flags=0x8<> natencap=none natsport=0 natdport=0  
ROUTING TABLE
192.1.2.0/24 dev eth1  proto kernel  scope link  src 192.1.2.23 
192.1.2.0/24 dev ipsec0  proto kernel  scope link  src 192.1.2.23 
192.0.1.0/24 dev ipsec0  scope link 
0.0.0.0/1 via 192.1.2.254 dev ipsec0 
128.0.0.0/1 via 192.1.2.254 dev ipsec0 
default via 192.1.2.254 dev eth1